Once you place an opening, you may want to move the opening in different directions. This article details how to move openings (doors and windows) in Giza using the slide and 2-point slide commands.
After placing an opening (door or window), you can move it as follows:
Move openings using Slide
Right-click on the opening to access the Edit menu.
Click on Slide.
As you move the mouse, notice the dimension lines appearing on screen. The dimensions indicate the measurement from the corner to the center of the opening.
Click to place the door at its new location.
Note: To place a 3’ door so that it will begin 3’ from the bottom left hand corner, you must measure 4’-6”. The slide command moves the opening from its center line so in order to place it 3’ from the corner half of the width of the door needs to be added in the slide.
Move openings using 2-Point Slide
You can use 2-point slide to place an opening relative to the corner of a room or any portion of the wall.
- Right-click the opening to access the Edit menu.
- Choose Slide, 2 Point.
- The status bar asks for the reference point move. Move the pointer to the opening be used as a measurement point, for example, edge doorjamb.
- Right-click to set the point exactly on the corner.
- The status bar asks for the reference point for the slide. Move to the point that will be moved from. For example, an interior corner of the room.
- Move the pointer along the wall. Notice, the dimension showing on the screen. When the opening is at the correct position, click to move the opening, or you can type in the slide dimension in the dimension box in the bottom right hand corner of the screen.
Note: In our example, place the door at 6" from the bottom left hand corner. You can also use the Move Dialog command to move the door a specific distance.