Giza has many different options to generate 3D views of your plan with two primary rendering modes. A hidden line view and color rendered view.
You will want to first set up your view in the 3D wireframe view by clicking the 3D icon on the toolbar. Once you have the view to your liking you can proceed with generating either a hidden line or color rendering.
Expand the sections below to learn more about each mode.
Hidden Line Renderings
The hidden line rendering is the same as the 3D wireframe view but with all lines removed that would not appear if the model surfaces were solid.
Once you have set the 3D View how you want it, click the Create Hidden Line icon to begin processing the hidden line. The time it takes go generate the hidden line can vary dramatically based on the number and type of objects in the scene.
Once the rendering is complete, the zoom commands can be used in the hidden line view if needed.
Do not use the Rotate View icons in the Hidden Line Render window. Rotate the drawing first in the 3D window, and then render the Hidden Line.
Note: Text can be added to hidden line renderings, but it is temporary and is not retained once you exit the hidden line or generate a new hidden line. This trick can be used if you need to add some text to the hidden line quickly before printing or saving the output.
Color Renderings
The Color Render mode will render exactly what is shown in the current 3D view window.
To ensure the full drawing is rendered with the desired result, use the various zoom commands, such as Zoom All icon in the 3D view, and then click the Render 3D Window icon
to begin the color render.
Changing Colors
- Right-click anywhere on the screen and select Choose Color.
- When a message box appears, click on any furniture symbol to change that color.
- In the Get Rendering Color dialog choose one of these options:
- choose a new color from the palette
- use the RGB (red, green, blue) slider bars to set a new color or shade
- click the Browse button. - If you clicked the Browse button, the Color Selection dialog appears. Choose a finish type (Fabric, Laminate, etc.) from the drop-down menu and a new color from the list, then click OK.
- Click Render Now to see the color change.
- To change another color, click Select Color and click on another symbol.
Color Maps
- In the Get Rendering Color dialog, click the Save button in the Colormap section.
- In the Export Color Map File dialog, enter a name for the color map (i.e., grays, blues, etc.). and click Save.
To apply a saved Color Map to a project:
- Access the Get Rendering Color dialog, and click Load.
- Select the name of the color map and click Open.
- Click Render Now to see the changes.
Saving the rendered image
- With the color render window open, and your rendering displayed to your satisfaction, select the Import/Export/Styles button on the toolbar.
- In the Import/Export/Styles dialog, click the Other tab.
- Select Image (.BMP or .JPG).
- Click Save to Any Folder.
- Navigate to the folder where the image file must be saved and assign a name to the image file, which can be the same as the name of the drawing.
- Choose a file type beside Save as type.
- Click Save.
Render Options
- From Tools menu, choose Options or click the Set Options icon
from the toolbar.
- Select the Render tab in the options dialog.
- You can add shadows to the rendering by selecting a Sun Position. You must click Apply after making a change to the sun position for it to take effect.
- Uncheck Edge Highlighting to make the rendering more realistic, as this will remove the edge lines from all surfaces.
- To show furniture in a room without showing walls, select Transparent Walls
- The Size Multiplier sets the rendering resolution, if you are going to save the rendering for printing you may want to change this. Typically, you would create a rendering with a multiplier of 2 or 3 if you wished to save the renderings as bitmaps at a higher resolution. If you create an oversize rendering and print it out, you get a better quality image than from a normal size rendering.
- Check Use Textures to use textures instead of colors on entities. Click Textures to set surface materials and textures used on rendered items.
- Change the options you want to try, click Apply, and then click Render Now to see the results.
- Click the Background tab if you wish to change the background color used in the rendering.
- Set a pattern option, such as Linear blend, allows you to chosee two colors to create a blended color background effect.
- Click Render Now to see the changes.
Perspective Camera
Use the Perspective Camera dialog to create a custom 3D view of the drawing. For example, you can set the view to look as if you are standing in the room looking at the furniture rather than the overhead view of a normal 3D, Hidden Line or Color Render window.
Click the Perspective Camera icon
The 2D and Perspective windows appear tiled on-screen. The 2D Plan is the camera.
Choose the desired options described below:
The camera has 4 square boxes on it:
- The black box attached to the camera with a dashed line sets the direction the camera is facing.
- The black box on the camera itself allows the camera to be dragged around the screen to set a different angle.
- The two black boxes at either end of the camera “lens” are used to change the zoom factor.
- To change direction, angle, or zoom place the cursor on one of the boxes (the cursor changes to a round cursor with arrows). Hold down the left mouse button and drag the box around the screen. When the mouse button is released, the changes will appear on-screen immediately.
The settings in the Camera dialog, default to a forward view:
Camera Ht.: 5’- This represents the eye level of the viewer.
Lookpt Ht.: 5’- This represents the height that the viewer is looking at
Angle: 45 - This represents the angle that is visible by the viewer.
Clip Dist.: 5’ – This represents the distance from the viewer that will be eliminated to see items beyond
Once the view is set, click Save.
Assign a name to the view.
To use saved views in other drawings, click Load in the Camera dialog.
To produce a Hidden Line or Color Render from the perspective view, maximize the Perspective window.
Click Zoom All.
Click the Hidden Line or Color Render icon.
Note: When the Perspective window is open, any render will default to that view. To render the 3D view, you must close the Perspective window.
Birds Eye view
Birdseye gives you a 3D perspective view that allows you to look down on your drawing. To get the full effect of this view, do a hidden line or full color rendering.
Click the Birdseye icon
. The entire drawing appears in 3D view from above.
Click either Hidden Line or Render.
Note: To get a more realistic look draw a floor using 3D objects from the Draw Menu.
Related articles