Apply frame designs

Click the Frame Designer icon

In the Assign Frames dialog box, select the frames that will receive the frame design.

Select the design you wish to apply in the Frame Design area from the drop-down.

Under Apply Frame Design, you can choose to apply the Frame Design to a Single frame or to a Selection of panels.

Under Show Tile Symbols, select if you choose to place tiles to All, Area or a Selection Set.

- All shows the tiles on all the applicable panel frames in the drawing that have been assigned a design
- Area places tiles in a specific area of your drawing. You will be prompted to define the area using the mouse.
- Select Selection Set places tiles in a selection set you have defined

Check Automatically Swap Frame to automatically replace the frame in your project with a frame type and height from the selected design.

Note: If you choose automatically swap frame and a frame you have selected is not of the same height as the design you have in your drawing it will change the frame to be of the same configuration. This is a good thing if the customer has changed their mind.

Check Hide All if you want to hide tiles in either the 2D or 3D drawing screens.

Check Log errors if you want to log errors that may be generated when you apply the design.