Interior walls

Select Single Wall from the Walls icon menu.

Choose the Point Input icon from the second row of toolbars.

From the Point dialog box, determine where you would like to place the single wall. In this case we want a 12’-6” interior dimension to the offices that we are going to create. We want to go to the left so we need to verify that the arrow is pointing to the left and the value is entered in the white box on the left side of the arrow. The From Fixed Point box needs to be checked. This will allow us to indicate from what fixed point we want to affect the distance of 12’6”. When the values are entered left click on Enter Point.

Bring your crosshairs to the inside corner of the bottom right hand side of your floor plan and right-click. This will click the exact point where the two walls join end to end.



Note: If you need to use a different justification to place the wall correctly. Make the change to the Walls Tool Bar before beginning the wall command.

Your ruler will appear connected to the wall 12’ 6” from the corner. Pull the crosshairs up until the crosshairs are in-between the two lines of the top horizontal wall and click.

Add a second horizontal wall that is 25’ from the bottom wall of the building using point input.